Top 9 Wading Boot Studs – Fishing Equipment

As an Amazon Associate I earn from qualifying purchases.

1. Chota Outdoor Gear


Chota Outdoor Gear Long Rifle Carbide Cleat Kit

Chota Outdoor Gear #ad - The sharp carbide tips provide traction in conditions where other cleats don't cut it. These heavy duty extremely hard carbide cleats bite deep through slippery silt and algae to the rock. Self-tapping threads are specially designed to hold fast in both felt and rubber soled wading boots. Chota's new cc22 long rifles set the "Gold Standard" for Carbide wading cleat. Removable and replaceable as conditions demands, 1/4 inch nut driver makes easy work attaching to soles and can be used on most wading boots in today’s market.
BrandChota Outdoor Gear #ad
ManufacturerChota Outdoor Gear (Sports) #ad
Height1 Inches
Length13 Inches
Weight0.25 Pounds
Width10 Inches
Part NumberCC22LR

2. Orvis


Orvis Posigrip Screw-in Studs

Orvis #ad - Adapter for power drill included. 24 studs per package. Made in the USA. Hex head screws. Screw-in studs with exclusive tungsten-carbide tips.
BrandOrvis #ad
ManufacturerOrvis #ad

3. Redington


Redington Goat Head Sole Spikes

Redington #ad - Short tip and beefy flange prevent accidental push through to the foot. Easy to install in just about any shoe as our needle point screw tip allows goes right in without pre-drilling or other methods. Small gauge of the tip leaves minimal impact to your sole if you remove the spikes later. Each cup contains 30 quality sole spikes made from cold-forged, heat-hardened, corrosion resistant stainless steel for maximum durability as well as a 1/4" magnetic socket bit for EASY installation.
BrandRedington #ad
ManufacturerGoat Head Gear #ad

4. Compass 360


Compass 360 Get-A-Grip Boot Studs 0.25

Compass 360 #ad - Can fit any compass 360 wading shoe with Locking Stud Grip Outsole. Hex head, steel slotted, non-taping screws. 30 screws per pack. Designed to be worn with either felt of cleated rubber outsoles.
BrandCompass 360 #ad
ManufacturerCompass 360 #ad
Height1 Inches
Length4 Inches
Weight0.04 Pounds
Width3 Inches
Part Number2500010
ModelCompass 360

5. Simms


Simms Alumibite Star Wading Boot Cleats, Corrosion-Free, 10 Fishing Boot Studs

Simms #ad - Confirm the studs each of your fishing boots needs by first inspecting the sole. Simms star wading boot cleats are designed to fit predefined locations on Vibram rubber outsoles. Stay in place: take every step with greater confidence. We obsess over every little detail to create fly fishing accessories of exceptional quality.

If your simms product fails due to excessive wear, accidents and breakdown of materials over extended time, Simms will make every effort to repair your gear for a reasonable fee. Each pack comes with 10 screw-in boot cleats. Upgrade your fishing gear while helping us keeping quality jobs in America. Trusted simms warranty: if your simms product fails due to a defect in workmanship or materials, Simms will repair or replace your gear and get you back on the water as soon as possible.

Our wading boot studs cut through the slime to keep you safe and stable. Corrosion-free metal: simms alumibite boot studs are durably designed to easily last you through the season. Compatible with all Simms wading boots. Made in the usa: our wading boot studs are proudly made in Bozeman, Montana. Great grip: crafted using aluminum, which is softer than carbide, these fishing boot studs conform to the micro surfaces of rocks to produce an excellent grip.
BrandSimms #ad
ManufacturerSimms #ad
Height0.87 Inches
Length2.83 Inches
Width2.44 Inches
Part Number10698-000-00

6. Rack'em


1 Pair, Rack'Em Racks Boot & Wader Rack

Rack'em #ad - Holds all styles & sizes - great for the entire family from the heaviest waders to small kids boots. Use in mud room, hunting lodge, garage, basement, camp or cabin; heavy-duty steel construction, 10.25"l x 1025"w x 4. 5"h. Stores footwear in one easy to find location; organized, dry & ready to wear. Reduces odor & mold by drying footwear open & off the floor. Dry, store & organize boots & waders.
BrandRack'em #ad
ManufacturerRack'Em #ad
Height4 Inches
Length11 Inches
Weight0.86 Pounds
Width9.5 Inches
Part Number1011

7. 8 Fans


8 Fans Wader Spikes Boots Studs for Wading Boots 30 pcs/Case

8 Fans #ad - Rust-proof alloy material: 8 fans wading shoes studs are made of Alloy material and treated for rust resistance:These ensure the high quality and durability of the boots studs. Suitable for thick rubber sole wading shoes:considering the length of boots studs, please help check the length of our studs and the thickness of your wading shoes before purchasing.

A free tool included:A free installation tool comes with the product. 10mm long wader boots studs:our boots buds have a diameter of 038in, the length is 039in. 8 fans wading shoes have thick rubber soles, which have enough room to be installed these wader spikes boots studs.

A must-have accessory for wading shoes:in the cost-effective wading shoes to provide our clients with the same time, when you walk on mud,  more focus on to bring them safety and unprecedented customer experience. Convenient for installation. 8 fans anti-rust and anti-skid wading studs will increase the grip of the shoes, ice or other slippery ground.
Brand8 Fans #ad
Manufacturer8 Fans #ad
Height0.8 Inches
Length2.2 Inches
Width2.2 Inches

8. Redington


Redington Wader Spikes, Goat Head

Redington #ad - Fishing fly fishing, ice fishing Hiking casual day hikes to serious back country treks. Cup contains: 30 stainless steel Sole Spikes and 1 magnetized nut driver bit ¼” socket. On the job lifties, tactical, public safetyIn your equipment lawn mowers, delivery, construction, snow blowers, fork lifts.
BrandRedington #ad
Height2 Inches
Length5 Inches
Weight4.02 Pounds
Width4 Inches
Part Number5-8012029

9. Simms


Carbon, Simms Tributary Rubber Sole Wading Boots Adult, Waterproof Fishing Boots, 9

Simms #ad - This thick toe acts as protection for toes and feet, unseen rocks or underwater tree trunks. Studs sold separately. Do not use bar soap or detergents. Do not place wet boots close to a heat source. This outsole is stud-compatible giving fishermen a firm grip over slippery riverbeds, lake bottoms, and algae-covered rocks.

Use specialized boot cleaner, saddle soap or a mild dishwashing soap with luke-warm water. Use an old vegetable brush or toothbrush to remove dust and dirt. This waterproof lining enables you to easily slide these boots on or off. Durable rubber toe cap: simm’s designed these wading boots with a durable rubber toe cap. Neoprene lining: these rubber soles shoes have a neoprene lining. Wading footwear care: if using these wet wading boots in saltwater always clean and rinse them to prevent corrosion.

Always air-dry. When walking across rocky, slippery, no more stubbing your toes on sharp, uneven terrain these rubber caps will come in handy. Tributary rubber sole wading boots: the simm’s tributary rubber wading boot provides the trusted support and traction to help you negotiate slick, uneven river bottoms. Traction rubber outsole: these rubber bottom fishing boots are designed with a thick traction rubber outsole. These boots feature a textile and synthetic lace-up upper.
BrandSimms #ad
Part Number12630-003-09