Top 8 Crown Race Removal Tool – Bike Shop Tools

As an Amazon Associate I earn from qualifying purchases.

1. IceToolz

#ad

Ice Toolz Crown Race Remover | Crown Race Remover Bike Tool | Fits 1-1/2"

#ad
IceToolz #ad - Function - the ice toolz crown Race Remover can easily get the race unstuck and enable the removal with bare hands. Made with quality materials - Constructed from quality steel with maximum strength and you can rely on long term. Compatibility - this tool fits up to 1. 5 inches headset crown races, making this tool effective for many jobs.
BrandIceToolz #ad
ManufacturerCyclone Bicycle #ad
Height0.67 Inches
Length3.86 Inches
Weight0.9 Pounds
Width3.54 Inches
Part NumberTL0014
ModelE253

2. Park Tool

#ad

Park Tool Bicycle Crown Race Setting System CRS-15.2 – 1 1/4" and 1.5"

#ad
Park Tool #ad - Made in the USA. Professional tool set for installation of bicycle fork crown races. Available for 1" & 1 1/8" steering columns crs-1 or 1 1/4" & 1. 5" steering columns CRS-15. 2.
BrandPark Tool #ad
ManufacturerPark Tool #ad
Height3 Inches
Length17 Inches
Weight3.41 Pounds
Width3 Inches
Part NumberCRS
ModelQKCRS152

3. CyclingDeal

#ad

CyclingDeal Bike Bicycle Fork Crown Race Setting Setter, Installation Install Tool 1-1/8" & 1"

#ad
CyclingDeal #ad - Quality & durable: the setter is made of high quality steel. Will not fit 1. 5" crown race. Easy to use: just place the crown race over the fork steerer. 2 in 1: the crown race setter fits all 2 sizes: 1" and 1-1/8". And smash it down to the end until the crown race perfectly sits flat on the fork using the setting tool. Please watch the video in the listing for more details. Very strong and durable! order now, worry free! we're so confident about our product quality that we can provide a life time warranty! Made in Taiwan.
BrandCyclingDeal #ad
ManufacturerCyclingDeal #ad
Height1.57 Inches
Length7.48 Inches
Weight2.2 Pounds
Width1.97 Inches
Part NumberSC-915

4. Park Tool

#ad

Park Tool CRP-2 Adjustable Crown Race Puller

#ad
Park Tool #ad - Note: blades are necessarily thin and will wear with use. Crown races with a tight press fit may also wear on blades. All-steel construction for long life. Accepts steering columns from 14 to 43cm 5. 5 to 17 inches in length. Universal design works with 1", 1-1/8", 1-1/4" and 1. 5 forks suspension or rigid and crown races with outside diameters up to 64mm. Replacement blades are available: Part #1155-3.
BrandPark Tool #ad
ManufacturerPro-Motion Distributing - Direct #ad
Height5 Inches
Length22 Inches
Weight6.61 Pounds
Width9 Inches
Part NumberCRP2
ModelCRP-2

5. Park Tool

#ad

Park Tool RT-1 Bicycle Headset and Bottom Bracket Cup Remover

#ad
Park Tool #ad - Nominal od of shaft is 1" 25. 4mm. Removes 1", 1 1/8" and 1 1/4" headset cups. For use on 27–38mm 1" to 1. 5" bearing race. Also removes some press fit bottom bracket cups including SRAM DUB and others. Professional-grade tool for bicycle headset and bottom bracket cup removal.
BrandPark Tool #ad
ManufacturerPark Tool #ad
Height12 Inches
Length2 Inches
Weight0.7 Pounds
Width1.5 Inches
Part NumberRT-1
ModelRT-1
WarrantyLimited Manufacturer

6. BIKE HAND

#ad

Bike Bicycle Fork Star Nut Setting Installer Install Tool with 2 Free Star Nuts, Size 1-1/8”

#ad
BIKE HAND #ad - Too low, the headset bolt cannot reach. Too high, the star nut cannot bite the steerer wall tightly. Easy to use: install the star nut onto the tool and tap it into the fork steerer using a hammer.

Order now, worry free! we're so confident about our product quality that we can provide a life time warranty ! Made in Taiwan. Perfect setting: the star nut need to be tapped into the fork steerer at the right position. Heat treated: heat treated high quality steel constructed for long time using. Compatibility: the threadless nut Setter is used to install the star-fangled nut found on 1-1/8” threadless headset systems.
BrandBIKE HAND #ad
ManufacturerBIKE HAND #ad
Height1 Inches
Length3 Inches
Width1 Inches
Part NumberYC-113A

7. Park Tool

#ad

Park Tool CRS-1 Crown Race Setting System

#ad
Park Tool #ad - Shis terminology: the crs-1 services in SHIS sizes 26, 27, 30 The crs-1 will work on forks of 340mm column length or less. The crs-1 set includes one universal setting tube, three 1" inserts, and three 1-1/8" inserts.
BrandPark Tool #ad
ManufacturerPark #ad
Height3 Inches
Length17 Inches
Weight2.01 Pounds
Width3 Inches
Part NumberQKCRS1
ModelCRS-1

8. Outgeek

#ad

Outgeek Crown Race Installation Tool Professional Bike Tool Bicycle Accessories Installation Tool

#ad
Outgeek #ad - Application: this crow setting tool is designed for ordinary 28. 6mm1. 13in outside diameter front fork; 1. 25 non-standard taper pipe front fork; 1. 5 standard taper pipe front fork. Non-slip: the crown race setting tool with matte finish is easy to hold which saves both time and labour. Material: made of aluminium alloy and tool steel material, high quality and durable to use. With hanging hole: The crown race setter designed with hanging hole is for easy storage. Size: Free size.
BrandOutgeek #ad
ManufacturerOutgeek #ad
Height1.97 Inches
Length13.58 Inches
Weight1.98 Pounds
Width1.97 Inches
Part Number24Y14MMT0C257GV5UC85L4