As an Amazon Associate I earn from qualifying purchases.
ColdLand Knives #ad - Awesome professional quality. Over 200 true layers of Damascus steel. Important: please read full product description below before purchasing.
Long lasting sharp edge: ideal for real hunt experience. Hardness: 58-60 hRC on Rockwell Scale. Important note: this is our stock photo. This item's Brand: ColdLand Knives.
Whole Earth Supply #ad - Coated in protective black powder coating. High carbon steel has extreme durability, resistance to chipping, easy sharpening and high edge retention.
Note: we also sell an extra large leather sheath that fits this item sold separately. High quality 1095hc high carbon steel construction. A final edge may be applied for an even sharper razor edge. The sheath must say "extra lARGE" in the title, in order to fit this blank.
Whole Earth Supply #ad - High carbon steel has extreme durability, resistance to chipping, easy sharpening and high edge retention. Note: we also sell a high quality leather sheath that fits this item sold separately.
Coated in protective black powder coating. Blade comes sharpened. Dimensions: 9. 5 inches approximate overall length, 2 inches widest part of blade, 1.
Whole Earth Supply #ad - A final edge may be applied for an even sharper razor edge. Note: we also sell a high quality leather sheath that fits this item sold separately. High quality D-2 steel construction. D-2 steel is more corrosion resistant than high carbon steel, while holding a better edge than stainless.
ColdLand Knives #ad - Dimension: see photos for dimensions. Tip: if your pins are bigger than handle holes, you can rub pins with sandpaper to adjust according to handle holes. You have a knife project and you are looking for a blank blade? Look no further, we have made a hand forged Damascus blank blade for you.
Solidly built for tough use. The holes in the handle can be small or big in diameter and can be found at different places on the handle you don’t need to use all holes to make a knife.
Heat treated. Note: this is our stock photo. Wash your knife and apply a thin layer of oil on your blade/knife after each use. We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and can rust your knife. You can search on the web i. E. How to make a knife from a blank blade”.
Mega Blades #ad - For long term storage; store your knife and sheath separately. Hand forged by using D2 steels. We don’t provide any directions on how to make a knife. Please message us if you have any issue with your purchase.
You can search on the web i. E. How to make a knife from a blank blade''. We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and can rust your knife.
Dimension: see photos for dimensions. Wash your knife and apply a thin layer of oil on your blade/knife after each use. You have a knife project and you are looking for a blank blade Look no further, we have made a hand forged D2 Steel blank blade for you. Overall length = 9 inch blade length = 4. 5 inch handle Length = 4. 5 inch blade thickness = 4 MM.
Damascus Depot #ad - Our damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. 4. 5" long scale space with 4 Pin holes for extra strength of scale. Overall 1075 inches long hand forged full tang Damascus steel tracker knife blank blade.
Whole Earth Supply #ad - The button will not snap on handles which are too thick. This is a right-handed-draw sheath when worn on the belt at your back This is referred to as "scout style", or a left-handed-draw sheath when worn on the left hip.
Important: please ensure this sheath will fit ALL dimensions of your knife before purchasing:. Sheath is 10 inches in total outside length, 2 1/2" wide at opening.
Whole Earth Supply #ad - 1095 is a high carbon steel not a stainless steel and is commonly used in heavy duty tools. It can carry an extremely sharp edge. Brass guard will require additional buffing and/or polishing.
It is much tougher than premium stainless steels. A final edge may be applied for an even sharper razor edge. Blade comes sharpened. 1095 makes great steel for heavy duty choppers and survival knives because of its extreme durability and resistance to chipping, easy sharpening and edge retention.
1. ColdLand Knives
#adColdLand Knives | Custom Handmade Damascus Steel Full Tang Blank Blade for Tracker Knife Making Supplies SB50
#adLong lasting sharp edge: ideal for real hunt experience. Hardness: 58-60 hRC on Rockwell Scale. Important note: this is our stock photo. This item's Brand: ColdLand Knives.
More information #ad
Buy only from leather-n-dagger store on Amazon. 100% satisfaction guaranteed or fully refunded. Hand forged by using 1095 & 15n20 steels. Will long last for several years lifetime if handled with care. You will receive different pattern as every Damascus Blade is unique in the world.| Brand | ColdLand Knives #ad |
| Manufacturer | ColdLand #ad |
| Part Number | SB50 |
| Model | SB50 |
More information #ad
2. Whole Earth Supply
#adWhole Earth Supply EXTRA LARGE, Black 1095 Carbon Steel Tracker Blank Blade Knives Knife Blanks
#adNote: we also sell an extra large leather sheath that fits this item sold separately. High quality 1095hc high carbon steel construction. A final edge may be applied for an even sharper razor edge. The sheath must say "extra lARGE" in the title, in order to fit this blank.
More information #ad
Blade comes sharpened. Dimensions: 12 inches approximate overall length, 2. 3 inches approximate widest part of Blade, 5. 875 inches approximate Blade Length, 2. 0 inches approximate Widest Part of Handle, 5. 5 inches approximate handle Length, Approximately 4-5mm Thick 1/8 inch.| Brand | Whole Earth Supply #ad |
| Manufacturer | Whole Earth Supply #ad |
| Length | 9.5 Inches |
| Weight | 11 ounces |
| Width | 2 Inches |
| Part Number | A-BLANK-34-1095-BLACK |
| Model | A-BLANK-34-1095-BLACK |
More information #ad
3. Whole Earth Supply
#adWhole Earth Supply 1095 High Carbon Steel Tracker Knife Blank Blade Hunting Skinning Skinner 1095HC Black Powder Coated
#adCoated in protective black powder coating. Blade comes sharpened. Dimensions: 9. 5 inches approximate overall length, 2 inches widest part of blade, 1.
More information #ad
2 inches widest Part of Handle, 4. 5 inches approximate Handle Length, 4. 5 inches approximate cutting Edge Length, Approximately 4mm Thick 1/8 inch. A final edge may be applied for an even sharper razor edge. High quality 1095hc high carbon steel construction.| Brand | Whole Earth Supply #ad |
| Manufacturer | Whole Earth Supply #ad |
| Length | 9.5 Inches |
| Weight | 11 ounces |
| Width | 2 Inches |
| Part Number | A-BLANK-34-1095-BLACK |
More information #ad
4. Whole Earth Supply
#adWhole Earth Supply D-2 Steel Tracker Knife Making Blank Blade Hunting Skinning Skinner D2 Knives
#adMore information #ad
Blade comes sharpened. Dimensions: 9. 5 inches approximate overall length, 1. 2 inches widest part of Handle, 4. 5 inches approximate Cutting Edge Length, 4. 5 inches approximate handle length, 2 inches Widest Part of Blade, Approximately 4mm Thick 1/8 inch.| Brand | Whole Earth Supply #ad |
| Manufacturer | Whole Earth Supply #ad |
| Length | 9.5 Inches |
| Weight | 11 ounces |
| Width | 2 Inches |
| Part Number | A-BLANK-34-D2 |
More information #ad
5. ColdLand Knives
#adDamascus Blank Blade Tracker Hand Forged 10.00 inches for Hunting Knife Making Supplies ZB106, ColdLand Knives
#adSolidly built for tough use. The holes in the handle can be small or big in diameter and can be found at different places on the handle you don’t need to use all holes to make a knife.
More information #ad
We don’t provide any directions on how to make a knife. Will long last for several years lifetime if handled with care. Over 260 true layers of Damascus steel. Heat treated. Note: this is our stock photo. Wash your knife and apply a thin layer of oil on your blade/knife after each use. We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and can rust your knife. You can search on the web i. E. How to make a knife from a blank blade”.
| Brand | ColdLand Knives #ad |
| Manufacturer | ColdLand Knives #ad |
| Part Number | ZB106 |
More information #ad
6. Mega Blades
#adGray, Mega Blades Fexmoo -7252 Custom Handmade D2 Steel Tracker Knife Blank Blade, Blank Blade For knife making
#adYou can search on the web i. E. How to make a knife from a blank blade''. We recommend to dry your new leather sheath under direct sunlight for several hours before putting your knife in it as leather contains moisture and can rust your knife.
More information #ad
Heat treated. Long lasting sharp edge. Hardness: 58-60 hRC on Rockwell Scale. Solidly built for tough use. Will long last for several years lifetime if handled with care. Dimension: see photos for dimensions. Wash your knife and apply a thin layer of oil on your blade/knife after each use. You have a knife project and you are looking for a blank blade Look no further, we have made a hand forged D2 Steel blank blade for you. Overall length = 9 inch blade length = 4. 5 inch handle Length = 4. 5 inch blade thickness = 4 MM.
| Brand | Mega Blades #ad |
| Manufacturer | Fexmoo Knives #ad |
| Part Number | Fexmoo - 7252 |
More information #ad
7. Damascus Depot
#ad4.5" scale space, 11 inches long Damascus steel tracker knife blank blade, hand forged Ladder pattern Damascus steel tracker knife, Camping knife with 4 Pin hole, 6 inches cutting edge
#adMore information #ad
Up to standard Tracker and camping Knife blank blade. Approximately 5 mm thick ladder pattern Damascus steel Tracker blade. 5. 5 inches long cutting edge. Blade is made of hand forged damascus steel by forging the 1095 and 15N20 high and low carbon steel.| Brand | Damascus Depot #ad |
| Manufacturer | Damascus Depot #ad |
More information #ad
8. Whole Earth Supply
#adWhole Earth Supply EXTRA LARGE, Light Brown Thick Leather Tracker Sheath Blade Knife Blanks Knives
#adImportant: please ensure this sheath will fit ALL dimensions of your knife before purchasing:. Sheath is 10 inches in total outside length, 2 1/2" wide at opening.
More information #ad
1/8" thick genuine cow leather. Please ensure the dimensions stated above fit your blade before purchasing. Fits a tracker style blade up to 6 inches long, up to 2 3/8" wide. Fits up to 4" circumference handle at the snap area Larger handles are not supported. Belt loop on back fits up to 1 1/2" width belt. Tracker knives come in many shapes and sizes.| Brand | Whole Earth Supply #ad |
| Manufacturer | Whole Earth Supply #ad |
| Length | 8.5 Inches |
| Weight | 4 ounces |
| Width | 1.5 Inches |
| Part Number | I-SHEATH-34-LIGHTBROWN |
| Model | I-SHEATH-34-LIGHTBROWN |
More information #ad
9. Whole Earth Supply
#adWhole Earth Supply Tracker 1095 High Carbon Steel Large Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
#adIt is much tougher than premium stainless steels. A final edge may be applied for an even sharper razor edge. Blade comes sharpened. 1095 makes great steel for heavy duty choppers and survival knives because of its extreme durability and resistance to chipping, easy sharpening and edge retention.
More information #ad
Solid brass guard, pinned to blank. Brass bolster is fixed to the blank with brass pins. 9. 875 inches approximate overall length, 2. 1 inches widest part of blank, 1. 3 inches widest Part of Handle, 4. 5 inches approximate Handle Length, 4. 625 inches approximate Blade Length, 4mm 1/8 inch Thick Approximately. Quality 1095 high carbon steel, one-piece construction.| Brand | Whole Earth Supply #ad |
| Manufacturer | Whole Earth Supply #ad |
| Length | 9 Inches |
| Weight | 13 ounces |
| Width | 1.5 Inches |
| Part Number | H-BLANK-34-1095-BRASS |
More information #ad
10. Whole Earth Supply
#adWhole Earth Supply Hammered D-2 Steel Tracker Knife Making Blank Blade Hunting Skinning Skinner D2 Knives
#adWhole Earth Supply #ad - A final edge may be applied for an even sharper razor edge. Dimensions: 9. 5 inches approximate overall length, 1. 2 inches widest part of handle, 2 inches Widest Part of Blade, 4. 5 inches approximate Handle Length, 4. 5 inches approximate cutting Edge Length, Approximately 4-5mm Thick 3/16 inch.More information #ad
D-2 steel is more corrosion resistant than high carbon steel, while holding a better edge than stainless. Hammered blade sides for unique look. Note: we also sell a high quality leather sheath that fits this item sold separately. Blade comes sharpened. High quality d-2 steel construction.| Brand | Whole Earth Supply #ad |
| Manufacturer | Whole Earth Supply #ad |
| Length | 9.5 Inches |
| Weight | 11 ounces |
| Width | 2 Inches |
| Part Number | A-BLANK-34-D2 |
More information #ad
