Top 10 Ball Joint Separator Tool – Quantity Discounts

As an Amazon Associate I earn from qualifying purchases.



3916D, GEARWRENCH Ball Joint Separator

GEARWRENCH #ad - Works on ball joints from 1-1/8” to 2-1/8” and 30 to 56mm in size. Gearwrench's ball joint separator is made for separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles. Suitable for most cars and light trucks not intended for use on 3/4 ton or 1 ton trucks. Adjustable for different size ball joints. Slot is 7/8" wide by 1-1/4" Deep.
ManufacturerGEARWRENCH #ad
Height2.75 inches
Length11 inches
Weight0.06 pounds
Width5.25 inches
Part Number3916D
WarrantyStandard Limited Lifetime

2. Orion Motor Tech


Splitter Removal Kit RD06, Tie Rod End Tool Set for Front End Service, OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller

Orion Motor Tech #ad - Universally compatible with a wide range of vehicles: The versatile design allows this tool to be used as a pitman arm remover, or tie rod end puller for many small, ball joint separator, domestic rear-wheel-drive vehicles, import vehicles, and light trucks. All in one front end service kit: containing 5 adjustable tools for a wide range of domestic and import vehicles.

Hardened alloy construction: extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. Professional portable abs case: the custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.

Never miss out on a job or project from a misplaced tool. Conveniently keeps all your tools in one organized and secure place. We guarantee the quality of our tools and want to ensure you’re only getting the best. Comes with 1x ball joint separator, 1x conical pitman arm puller, 1x pitman Arm and Tie Rod End Puller, 1x Tie Rod and Ball Joint Remover, 1x Pitman Arm Puller, 1x well-organized ABS case. Orion motor tech promise: if any issues from our tools arise please don’t hesitate to contact us.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height12.2 Inches
Length15.35 Inches
Width3.15 Inches
Part NumberPAP0006RD GWCA



Ball Joint Removal Tool, And Joint Splitter, Heavy Duty Steel Tie Rod Removal Tool, OEMTOOLS 25202 Ball Joint Separator, 15/16 Inch Pickle Fork Tool

OEMTOOLS #ad - Pickle fork separator tool: the tapered fork wedge design of this ball joint separator tool focuses on the fundamentals of machine technology for an easy and uncomplicated process.

Precision performance: striking the handle with a hammer separates the ball joint cleanly; Designed with a 15/16 inch opening for a firm hold and secure removal. Versatile uses: this universal ball joint separator can be used for a variety of repairs; For example, the ball joint tool can also be used on CV drive shafts. Thoughtful design: ball joint separator handle features a nonslip knurled texture; Used as designed, this front end service tool will stand up to years of use. Hardened steel: the heat treated steel alloy construction of this ball joint separator stands up to tough jobs; Zinc plating resists rust and extends service life.
ManufacturerOEM #ad
Height1 inches
Length14.8 inches
Weight1.55 Pounds
Width2.75 inches
Part Number25202
WarrantyOEMTOOLS Limited Lifetime



RACOONA Ball Joint Separator,Ball Joint Separator Tool,Car Accessories Universal Adjustable Ball Joint Removal Tool with an Opening Range from 1-1/8" to 2-1/8",Compatible with Most Cars

RACOONA #ad - Applicable this spherical joint separator is widely used in the separation arms, and spherical joints of automobiles and trucks, specifically designed to quickly and conveniently separate the vehicle's spherical joint from the main shaft support arm. Easy to use simply fix the tool on the ball joint that needs to be disassembled, and then use a socket wrench to rotate the tool to remove the ball joint lubricate the tool and ball joint with lubricating oil before disassembly.

Design the ball joint separator disassembly tool is equipped with a black oxide push rod and locking pin. Align the push rod with the machined groove in the steel body, keeping the tool aligned and minimizing warping with each increase in rotational pressure. Adjustablethe spherical joint tool includes a detachable pin that can be installed at two pivot points, with openings ranging from 1-1/8 "to 2-1/8" to accommodate a wider working area and various sizes and vehicles.

On domestic and imported front wheel drive vehicles, tie rods, it separates the ball joint from the spindle arm. Durable material this ball joint disassembly kit is made of sturdy steel structure and can provide all the strength and durability you need, making it suitable for long-term use.
BrandRACOONA #ad
ManufacturerRACOONA #ad
Part Number934RSQTLBQ001



ATVs, Trucks, ATPEAM Universal Ball Joint Separator | Heavy Duty Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars

ATPEAM #ad - Wide application: universal ball joint separator – remover tool for Separating Arms, Trucks, Tie Rods, and Ball Joints on Cars, ATVs is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm.

Heavy duty ball joint remover: this ball joint removal kit features a strong steel construction and pins with black oxide coating for all the strength and durability you need; Durable ball joint separator will last for years to come. Ball Joint Separator. Easy to use: slip the forked end between the boot and metal attachment point, and then tighten the bolt until there is enough resistance; Hit the connection point and/or finger with a hammer, make sure that the pivot finger is perpendicular to the threaded end, and then hit again; when the stud is loose, tighten some more, the tool will be loosened immediately.

Package included: 1 pc. Specification: 1-1/8" to 2-1/8" 30mm to 56mm maximum opening capacity; accepts 3/4" sockets or wrenches; 4/5" 20mm fork opening; 9/10” 48mm adjustable height; Can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles; Scissors-type design.
BrandATPEAM #ad
ManufacturerATPEAM #ad
Height3 Inches
Length9 Inches
Width8 Inches
Part NumberAM-12-16-09



Tie Rods, 8MILELAKE Universal Ball Joint Separator Removal Tool Compatible for Cars, and Ball Joints, ATVs Separating Arms, Trucks

8MILELAKE #ad - It works on most cars and light trucks. Heat treated drop Forged, steel body and bolt for long rough usage. For separating the ball joint from the Spindle Support Arm on Domestic and Import Front Wheel Drive Vehicles. Spread ball joints easily from the spindle support arm. Fork opening:19mm.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height7.87 Inches
Length11.81 Inches
Weight1.1 pounds
Width3.94 Inches
Part NumberTR0852



OEMTOOLS 25112 Ball Joint Separator for Cars, Ball Joint Removal Tool, Trucks, and SUVs, Adjustable Ball Joint Puller Extends Up to 2 3/8 Inches

OEMTOOLS #ad - For cars, trucks, and suvs: efficiently separates the ball joint from the spindle support arm on most newer domestic and import front wheel drive vehicles, including trucks and SUVs.

Extended range: in order to fit the variety of vehicles this near universal tool can service, it adjusts up to 2 3/8 inches for various ball joints. Easy to use: this ball joint removing tool is designed to be the easiest means to replace top of the line ball joints; Simply twist the removable nut until the joint pops out. Low profile: give yourself plenty of room to work; This ball joint separator is designed to access tight access where most ball joint separators won’t fit. Designed with care: this ball joint splitter tool carries less risk of damaging the boot than a pickle fork joint remover and a hammer.
ManufacturerOEMTOOLS #ad
Height2.5 Inches
Length5.5 Inches
Width3.5 Inches
Part Number25112
WarrantyOEMTOOLS Limited Lifetime

8. Orion Motor Tech


Ball Joint Puller and Extractor with 1/2" Socket, OMT Ball Joint Separator, 1-1/8" to 2-1/8" Ball Joint Removal Tool for Separating Ball Joints Arms Tie Rods on Most Cars and Light Trucks

Orion Motor Tech #ad - Durable construction: our ball joint removal tool is made from premium AISI 1045 medium carbon steel that has been cold forged and heat treated for superior strength and longevity, while the black oxide coated pins provide optimal corrosion resistance and durability for powerful leverage.

Simple operation: this mechanic tool separates ball joints without damaging other components; the included 1/2 inch Cr-V structured socket works with your socket wrench to ensure easy ball joint removal in record time. Adjustable opening: this automotive tool includes a removable pin to fit into two pivot points to adjust to wider working areas and different ball joint sizes; its 1-1/8" to 2-1/8" opening range ensures compatibility with most passenger vehicles.

Universal compatibility: orion motor tech's ball joint separator helps you to quickly and easily separate ball joints, and tie rods from the spindle support arm on most cars and light trucks, arms, without needing other tools.1 year warranty: orion motor tech backs this ball joint puller with strong 1 year warranty and our usual friendly 24/7 customer service, ensuring that you'll enjoy its dependable use for years to come! .
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height3 inches
Length9 inches
Weight3 pounds
Width5 inches
Part NumberB001-00
Warranty1 year warranty

9. Astro Pneumatic Tool


Astro Tools 78912 Low Profile Ball Joint Separator, Black

Astro Pneumatic Tool #ad - Item package Weight: 2. 43 pounds. Designed for tight access where most ball joint separators won't fit. Particularly useful on 2005+ Ford, Lincoln and Mercury applications. Impact rated durable forged design with a longer throat to fit more applications.
BrandAstro Pneumatic Tool #ad
ManufacturerAstro Tools #ad
Part Number78912
WarrantyManufacturer’s warranty.



DURATECH Ball Joint Separator, and Ball Joints, Universal Ball Joint Removal Tool Adjusts from 1-1/3" to 2-1/8" for Separating Arms, Tie Rods

DURATECH #ad - Wide compatibilityadjustable ball joint tool with an opening range from 1-1/3" to 2-1/8", which ensures it can be widely used on American domestic and imported vehicles, trucks, SUVs, fit for cars, UTVs and pickups. Great functionthis ball joint separator is widely used to separating arms, tie Rods, trucks, and Ball Joints on Cars, is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm.

Durable ball joint removerthis ball joint remover features a strong steel construction and pins with black oxide coating, which ensure high strength for the tools and give it a long lifetime, perfect for professional machinists.

Specificationsmaximum opening capacity: 1-1/3" and 2-1/8". Bolt length: 3-7/8", fits 21mm / 13/16" wrenches or sockets. With the removable pin, you can adjust to 2 sizes for wider working areas and to accommodate various sizes and vehicles. Body length: 6". It separates ball joints from the spindle arm on domestic and import front wheel drive vehicles. 2-stage designadjustable for different sizes ball joints.
ManufacturerHangzhou Great Star Industrial Co,.LTD #ad
Part NumberDT701108AE