TEKTON 1-1/8-Inch x 1-1/4-Inch 45-Degree Offset Box End Wrench | WBE23329

#ad
TEKTON WBE23329 #ad - Made of premium chrome vanadium steel with a mirror chrome finish. 1 1-1/8-inch x 1-1/4-inch 45-degree offset box end wrenchcheck out TEKTON Offset Box End Wrench Sets Ends are offset 45 degrees to reach over and around obstructions. 12-point openings double the access angles of a 6-point, making it easier to work in tight spaces.

Box end geometry is designed to grip flat sides of fastener heads, not corners, to prevent round-off.

#ad



TEKTON 47796 1/2-Inch Drive by 1-1/8-Inch Deep Impact Socket, Cr-V, 6-Point

#ad
TEKTON 47796 #ad - Deep impact Socket is engineered for use with impact drivers. To prevent round-off under stress, it grips the flat sides of fastener heads rather than the corners. To protect against rust and corrosion, the black phosphate finish absorbs and holds oil, repelling moisture. Engineered for use with impact drivers.

It has a 6-point opening that snugly fits the hex shape of fastener heads, allowing it to apply maximum torque without slipping. Large, high-contrast size marking is permanently laser etched and easy to read, even in low light. Made of premium chrome vanadium steel with a protective black phosphate finish.

TEKTON 47796 1/2-Inch Drive by 1-1/8-Inch Deep Impact Socket, Cr-V, 6-Point #ad - Easy to read even in low light, the large, high-contrast size marking is permanently laser etched into the steel surface. High-torque, not corners, 6-point opening grips flat sides of fasteners, preventing round-off. Extra-deep broach accommodates longer fasteners. The tekton 1/2 in. Drive x 1-1/8 in. The through-hole in the drive end locks onto the tang of impact wrenches or drivers so it won't fall off or stick on fastener heads.

#ad



Neiko 30237A 3/4" Female x 1/2" Male Impact Adapter

#ad
Ridgerock Tools Inc. 30237A #ad - This adapter delivers strong performance with chrome vanadium steel construction for extra strength while the black oxide finish allows for a long lasting product resistance to corrosion. Engineered for use with impact drivers. Engineered to be used with impact drivers; transform your 3/4" drive size to 1/2".

Impact adapter is constructed from strong chrome vanadium steel that is strong and dependable for all your jobs. Made of premium chrome vanadium steel with a protective black phosphate finish. The ball detent hold sockets securely for a smooth work flow without any slippage and the chamfered lead aides in a secure fit.

Special chamfered design makes it so there is a secure fit and the through hole feature allows use of locking pins and rings. Specially engineered to be used with your impact drivers, the 3/4" drive adapter transforms your driver into a 1/2" drive allowing you to perform a wider range of operations and extending the use of your tools.

Neiko 30237A 3/4" Female x 1/2" Male Impact Adapter #ad - Ball detent locks securely onto sockets securely and prevents it from being dropped for undisturbed work. Large, high-contrast size marking is permanently laser etched and easy to read, even in low light. High-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off. Extra-deep broach accommodates longer fasteners.

Long lasting corrosion resistant black oxide finish provides a quality adapter that will maintain its quality throughout multiple uses.

#ad



TEKTON 1-1/8-Inch Combination Wrench | 18268

#ad
Michigan Industrial Tools 18268 #ad - Engineered to be used with impact drivers; transform your 3/4" drive size to 1/2". Impact adapter is constructed from strong chrome vanadium steel that is strong and dependable for all your jobs. Classically lean and quietly refined, TEKTON Combination Wrenches provide a sure fit on fasteners and multiple options for working around obstructions or in tight spaces.

To reduce the working swing arc, the open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often. Long lasting corrosion resistant black oxide finish provides a quality adapter that will maintain its quality throughout multiple uses. Large, high-contrast size marking is permanently laser etched and easy to read, even in low light.

TEKTON 1-1/8-Inch Combination Wrench | 18268 #ad - It's offset 15 degrees, creating clearance for your fingers and extra space to slide past whatever might be in the way. Made of premium chrome vanadium steel with a protective black phosphate finish. The 12-point box end doubles the access angles of a 6-point. High-torque, not corners, 6-point opening grips flat sides of fasteners, preventing round-off.

Extra-deep broach accommodates longer fasteners. Ball detent locks securely onto sockets securely and prevents it from being dropped for undisturbed work. Made of premium chrome vanadium steel with a mirror chrome finish.

#ad



Neiko 30223A Impact Adapter and Reducer Set, 8 Piece | Cr-V | SAE

#ad
Ridgerock Tools Inc. 30223A #ad - M x 3/8 in. F, 3/8 in. Long lasting corrosion resistant black oxide finish provides a quality adapter that will maintain its quality throughout multiple uses. They create replacements for lost or broken sockets, expand incomplete socket sets, and Allows greater flexibility for all sockets and drive tools. Large, high-contrast size marking is permanently laser etched and easy to read, even in low light.

Special chamfered design makes it so there is a secure fit and the through hole feature allows use of locking pins and rings. Engineered to be used with impact drivers; transform your 3/4" drive size to 1/2". Always Guaranteed. F engineered for use with impact drivers. Made of premium chrome vanadium steel with a mirror chrome finish.

Neiko 30223A Impact Adapter and Reducer Set, 8 Piece | Cr-V | SAE #ad - Adapters: 1 in. Durable 8-piece impact socket adapter and reducer set. F, 1/4 in. Ball detent locks securely onto sockets securely and prevents it from being dropped for undisturbed work. F, 1/2 in. Set includes: 4-pc. High-torque, not corners, 6-point opening grips flat sides of fasteners, preventing round-off.

#ad



DEWALT 1/2" 12 PT Deep Socket 1 1/8 - DWMT74540B

#ad
Dewalt DWMT74540B #ad - Chamfered open end for easier engagement of fasteners. Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off. Engineered to be used with impact drivers; transform your 3/4" drive size to 1/2". Made of premium chrome vanadium steel with a protective black phosphate finish.

High-torque, not corners, 6-point opening grips flat sides of fasteners, preventing round-off. Extra-deep broach accommodates longer fasteners. Allows greater flexibility for sockets and drive tools and maximizes the versatility of ratchets and sockets. Long lasting corrosion resistant black oxide finish provides a quality adapter that will maintain its quality throughout multiple uses.

DEWALT 1/2" 12 PT Deep Socket 1 1/8 - DWMT74540B #ad - Impact adapter is constructed from strong chrome vanadium steel that is strong and dependable for all your jobs. Always Guaranteed. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. Ball detent locks securely onto sockets securely and prevents it from being dropped for undisturbed work.

Made of premium chrome vanadium steel with a mirror chrome finish. The chrome finish helps provide protection against chipping and flaking. Special chamfered design makes it so there is a secure fit and the through hole feature allows use of locking pins and rings.

#ad



Sunex 97740A 1/2" Dr. 1-1/4" Jumbo Crowfoot Wrench CRV

#ad
Sunex International 97740A #ad - 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. Special chamfered design makes it so there is a secure fit and the through hole feature allows use of locking pins and rings. Professional quality reducers and adapters lock onto sockets with spring loaded ball detents and drive tangs for a sure and tight fit.

Made of premium chrome vanadium steel with a protective black phosphate finish. Engineered to be used with impact drivers; transform your 3/4" drive size to 1/2". Sunex 97740a 1/2-inch drive, 1-1/4-inch Jumbo crowfoot wrench, alloy steel Engineered for use with impact drivers. Fully polished drop forged alloy steel.

Sunex 97740A 1/2" Dr. 1-1/4" Jumbo Crowfoot Wrench CRV #ad - Chamfered open end for easier engagement of fasteners. Always Guaranteed. 1-1/4-inch jumbo crowfoot wrench. Hard stamped markings to prevent loss of identification over time. Made from high-strength, heat-treated, shock-resistant chrome vanadium steel with corrosion-resistant black oxide finish. Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces.

A complete drive impact socket adapter and reducer set with hard-to-find conversions; eliminates the need for multiple impact wrenches.

#ad



TEKTON 47795 1/2-Inch Drive by 1-1/16-Inch Deep Impact Socket, Cr-V, 6-Point

#ad
TEKTON 47795 #ad - High-torque, not corners, 6-point opening grips flat sides of fasteners, preventing round-off. Extra-deep broach accommodates longer fasteners. Long lasting corrosion resistant black oxide finish provides a quality adapter that will maintain its quality throughout multiple uses. Easy to read even in low light, the large, high-contrast size marking is permanently laser etched into the steel surface.

. To prevent round-off under stress, it grips the flat sides of fastener heads rather than the corners. A complete drive impact socket adapter and reducer set with hard-to-find conversions; eliminates the need for multiple impact wrenches. Engineered for use with impact drivers. High-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off.

TEKTON 47795 1/2-Inch Drive by 1-1/16-Inch Deep Impact Socket, Cr-V, 6-Point #ad - Extra-deep broach accommodates longer fasteners. Allows greater flexibility for sockets and drive tools and maximizes the versatility of ratchets and sockets. 1/2-inch drive. Professional quality reducers and adapters lock onto sockets with spring loaded ball detents and drive tangs for a sure and tight fit.

Chamfered open end for easier engagement of fasteners. Made of premium chrome vanadium steel with a mirror chrome finish.

#ad



TEKTON 4966 3/8-Inch Drive Impact Extension Bar Set, Cr-V, 3-Piece

#ad
TEKTON 4966 #ad - Fully polished drop forged alloy steel. Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces. Drive extensions: 3, 6, 8 in. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. High-torque, not corners, 6-point opening grips flat sides of fasteners, preventing round-off.

Extra-deep broach accommodates longer fasteners. Large, high-contrast size marking is permanently laser etched and easy to read, even in low light. Special chamfered design makes it so there is a secure fit and the through hole feature allows use of locking pins and rings. Hard stamped markings to prevent loss of identification over time.

TEKTON 4966 3/8-Inch Drive Impact Extension Bar Set, Cr-V, 3-Piece #ad - Made of premium chrome vanadium steel with a protective black oxide finish. Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off. Chamfered open end for easier engagement of fasteners. Made of premium chrome vanadium steel with a protective black phosphate finish.

Drive impact Extension Set. Engineered for use with impact drivers. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped.

#ad



TEKTON 47761 1/2-Inch Drive by 1-1/8-Inch Shallow Impact Socket, Cr-V, 6-Point

#ad
TEKTON 47761 #ad - Knurled control Ring for added grip when handling the socket. The through-hole in the drive end locks onto the tang of impact wrenches or drivers so it won't fall off or stick on fastener heads. Ball detent locks securely onto sockets securely and prevents it from being dropped for undisturbed work. Made of premium chrome vanadium steel with a protective black phosphate finish.

1/2-inch drive. Through-hole in drive ends locks onto drive tang. It has a 6-point opening that snugly fits the hex shape of fastener heads, allowing it to apply maximum torque without slipping. Engineered for use with impact drivers. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers.

TEKTON 47761 1/2-Inch Drive by 1-1/8-Inch Shallow Impact Socket, Cr-V, 6-Point #ad - Engineered for use with impact drivers. Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off. Drive x 1-1/8 in. Made from high-strength, heat-treated, shock-resistant chrome vanadium steel with corrosion-resistant black oxide finish. To protect against rust and corrosion, the black phosphate finish absorbs and holds oil, repelling moisture.

High-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off.

#ad



Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz.

#ad
Lubegard 60902 #ad - Large, high-contrast size marking is permanently laser etched and easy to read, even in low light. 29. 6 ml per quart liter of aTF to the total transmission capacity including torque converter with motor idling in park. Made of premium chrome vanadium steel with a protective black oxide finish. 1-1/4-inch jumbo crowfoot wrench.

Includes: 3/8" to 1/4" reducer, 3/4" to 1/2" reducer, 1/4" to 3/8" adapter, 1" to 3/4" reducer, 1/2" to 3/8" reducer, 1/2" to 3/4" adapter, 3/8" to 1/2" adapter, 3/4" to 1" adapter. Direct torque Technology helps prevent rounding of fasteners. Made of premium chrome vanadium steel with a protective black phosphate finish.

Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz. #ad - Do not overfill. Engineered for use with impact drivers. Made of premium chrome vanadium steel with a protective black phosphate finish. Lubegard controls heat and is especially effective in today’s hotter running front wheel drive vehicles. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers.

. Adds length to access hard-to-reach fasteners. Engineered for use with impact drivers.

#ad