Dana Spicer 2-2-1379 Ford 8.8 Flange Adapter by Dana Spicer

-




Ford Driveshaft Yoke Bolts N800594S100 Pkg of 4 bolts. M12X1.75X27.0

Ford N800594S100 - Package of 4 driveshaft yoke bolt for many Ford products New genuine Ford Product. Fits many Ford vechiles. M12x1. 75x27. 0 .





Artec Industries TR8801 Tj 8.8 Swap Kit With Truss

Artec Industries TR8801 - Brackets are jigged into truss and set exact position automatically. Tj 8. 8 swap kit with Truss. When swapping, the 3. 73 gear ratio may need to be changed to match your Jeep gears and wheel spacers may be necessary to bring the width back to factory specs since the 8. 8 is 1. 25" narrower than the dana 35. The ford Explorer 8.

8 features: same lug nut bolt pattern as dana 35, 3-1/4" diameter tubes as compared to 2. 625" dana 35, 31 spline axle shafts, disc brakes 1995 & newer, 8.8" diameter ring gear which 120% stronger than dana 35, only 20 pounds more than dana 35, and a trac-loc differential stock. M12x1. 75x27. 0 This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing the factory link, anti-sway bar, and shock locations.

Artec Industries TR8801 Tj 8.8 Swap Kit With Truss - The 1/4" thick truss top incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength. Tj 8. 8 swap kit with axle truss all the brackets necessary for the popular Explorer 8. 8 rear axle swap into a jeep tj wrangler '97-'06 Artec Industries is excited to announce the TJ 8.





USA Standard Gear SL F8.8-31 Ford 8.8 differential-31 Spline axles Spartan LunchBox Locker

Yukon Gear SL F8.8-31 - Easy, drop-in installation. Heat treated and precision cut teeth. 8 differential with 31 spline axles. M12x1. 75x27. 0 Backed by 1 year. Drop a spartan in your jeep or 4x4 today, and take to the trail with confidence! New genuine Ford Product. Fits ford 8. The spartan locker from USA Standard Gear is the perfect blend of affordability and performance.

Fits many Ford vechiles. Designed for off-road usage, this lunchbox locker is easy to install and provides a significant increase in strength over stock differentials. Tj 8. 8 swap kit with Truss. Made from 9310 steel.





Yukon Gear AK 1559 Axle Bearing & Seal Kit

Yukon Gear AK 1559 - Tj 8. 8 swap kit with Truss. Services One Side Only. Fits ford 8. Made from 9310 steel. Heat treated and precision cut teeth. New genuine Ford Product. Backed by 1 year. Includes Installation Guide. High quality Bearings and Seals. Fits many Ford vechiles. M12x1. 75x27. 01 year Warranty. Axle bearing and seal kits from Yukon Gear and Axle use high quality bearings and seals designed for specific applications in differential systems.

Easy, drop-in installation. 8 differential with 31 spline axles.





Johnson Level & Tool and Tool 700 Magnetic Angle Locator

Johnson Level & Tool 700 - Overall height - top to bottom: -10 Tj 8. 8 swap kit with Truss. Product type: -rulers. Convenient metric rule on one edge, and English rule on the other. Fits many Ford vechiles. 19'' w x 1. New genuine Ford Product. M12x1. 75x27. 0 Permanent ceramic magnet; metric and English rule. Heat treated and precision cut teeth. Overall depth - front to back: -1.

High-impact plastic body. Fits ford 8. Made from 9310 steel. Overall product weight: -0 Strong, magnetic contact for accurate angle identification. 5'' h x 6. 1 year Warranty. 88'' d. Helpful for setting machine angles or for obtaining any angle. 88 inches. 1-year limited. 46 pounds. 8 differential with 31 spline axles. Services One Side Only.





USA Standard Gear ZK F8.8 Ford 8.8" Differential Master Overhaul Kit

USA Standard Gear ZK F8.8 - Strong, magnetic contact for accurate angle identification. 1-year limited. Heat treated and precision cut teeth. Fits ford 8. High-impact plastic body. 1 year Warranty. Tj 8. 8 swap kit with Truss. Complete Installation Kit. Angle locator designed for durability and easy use. Permanent ceramic magnet; metric and English rule.

Made from 9310 steel. M12x1. 75x27. 0 Services One Side Only. High quality Bearings and Seals. 1 year Warranty. Easy, drop-in installation. Uses high quality Koyo Bearings and Races. Backed by 1 year. 8 differential with 31 spline axles. Includes Installation Guide. Included in the usa standard master overhaul kit are carrier bearings and races, thread locker, pinion bearings and races, pinion nut, pinion seal, ring gear bolts, complete shim kit, crush sleeve if applicable, marking compound with brush and gasket New genuine Ford Product.

USA Standard Gear ZK F8.8 Ford 8.8" Differential Master Overhaul Kit - Fits many Ford vechiles.





Rough Country Suspension 89703 Brake Line

Rough Country Suspension 89703 - Easy, drop-in installation. Made from 9310 steel. Rough country Suspension Systems. Offers a lifetime Replacement Warranty on most suspension products. 1 year Warranty. Fits ford 8. 8 differential with 31 spline axles. Complete Installation Kit. Stainless. Backed by 1 year. A lot of things can happen on the road less traveled, and Rough Country has you covered!

We're confident in our high-quality products so we're giving you more peace of mind and more bang for your buck! M12x1. 75x27. 0 Strong, magnetic contact for accurate angle identification. Permanent ceramic magnet; metric and English rule. We'll replace your defective item at no cost to you! New genuine Ford Product.

Rough Country Suspension 89703 Brake Line - Heat treated and precision cut teeth. All products are warranted to be free from defects in material and craftsmanship for the life of the vehicle if utilized in accordance with the manufacturer's instructions for installation and operation of said products. 1-year limited. High quality Bearings and Seals.





Barnes 4WD Jeep TJ Rear AXLE Brackets

Barnes 4WD - Permanent ceramic magnet; metric and English rule. This kit is designed to maintain all factory mounting locations and is suitable to use with most aftermarket lift kits. Strong, magnetic contact for accurate angle identification. Jeep. This is a complete kit that comes with all the brackets needed to swap a different rear axle into your Jeep, all brackets are cut to fit a 3 1/4" axle tube Ford 8.

8 but will fit other size tubes with minor modification. Services One Side Only. 1 year Warranty. Complete Installation Kit. High quality Bearings and Seals. Heat treated and precision cut teeth. 8 differential with 31 spline axles. High-impact plastic body. Barnes 4wd is proud to offer our jeep tj rear axle bracket kit, this is for the do it yourself folks that want to swap the rear axle in their Jeep TJ or LJ.

Barnes 4WD Jeep TJ Rear AXLE Brackets - Barnes 4wd is proud to offer our jeep tj rear axle bracket kit, this is for the do it yourself folks that want to swap the rear axle in their Jeep TJ or LJ. This is a complete kit that comes with all the brackets needed to swap a different rear axle into your Jeep, all brackets are cut to fit a 3 1/4" axle tube Ford 8.

8 but will fit other size tubes with minor modification. We have used our exceptionally strong ultra 100 steel in all of the high stress areas of this kit, so you can rest assured that this is the strongest kit on the market.





JEEP TJ 8.8 SWAP KIT AND TRUSS

Barnes 4WD - Heat treated and precision cut teeth. Strong, magnetic contact for accurate angle identification. Barnes 4wd is proud to offer our jeep tj rear axle bracket kit, this is for the do it yourself folks that want to swap the rear axle in their Jeep TJ or LJ. This is a complete kit that comes with all the brackets needed to swap a different rear axle into your Jeep, all brackets are cut to fit a 3 1/4" axle tube Ford 8.

8 but will fit other size tubes with minor modification. We have used our exceptionally strong ultra 100 steel in all of the high stress areas of this kit, so you can rest assured that this is the strongest kit on the market. This kit is designed to maintain all factory mounting locations and is suitable to use with most aftermarket lift kits.

JEEP TJ 8.8 SWAP KIT AND TRUSS - Contents of the kit include: 2 ultra 100 upper control arm mounts 2 sway bar brackets 2 coil spring bracket kits 2 ultra 100 lower controL ARM MOUNTS 2 ULTRA 100 SHOCK MOUNTS 1 Ultra 100 track bar bracket 6 3/8" Grade 8 Nuts. Complete Installation Kit. Tj 8. 8 swap kit with Truss. Fits many Ford vechiles. The only time you will need to use a tape measure, is to center the truss on the axle and to locate the shock brackets.

Made from 9310 steel.





Includes Pair of Spicer 5-760X Axle U-Joints - Spicer Dana 30/44 Heavy Duty Axle U-Joint Combo

Spicer 5-760X - M12x1. 75x27. 0 Heavy duty forged Cross with Inside Snap Ring. Perma-lube improved Seals For Long Service Life. Cup size= 1. 188in / snap ring To Snap Ring= 2. 188in. 1 year Warranty. Trust the spicer brand for components that are manufactured to OE standards. Includes Installation Guide. High-impact plastic body. Backed by 1 year.

Barnes 4wd is proud to offer our jeep tj rear axle bracket kit, this is for the do it yourself folks that want to swap the rear axle in their Jeep TJ or LJ. This is a complete kit that comes with all the brackets needed to swap a different rear axle into your Jeep, all brackets are cut to fit a 3 1/4" axle tube Ford 8.

8 but will fit other size tubes with minor modification. We have used our exceptionally strong ultra 100 steel in all of the high stress areas of this kit, so you can rest assured that this is the strongest kit on the market. This kit is designed to maintain all factory mounting locations and is suitable to use with most aftermarket lift kits.

Includes Pair of Spicer 5-760X Axle U-Joints - Spicer Dana 30/44 Heavy Duty Axle U-Joint Combo - Contents of the kit include: 2 ultra 100 upper control arm mounts 2 sway bar brackets 2 coil spring bracket kits 2 ultra 100 lower controL ARM MOUNTS 2 ULTRA 100 SHOCK MOUNTS 1 Ultra 100 track bar bracket 6 3/8" Grade 8 Nuts. Uses high quality Koyo Bearings and Races. Permanent ceramic magnet; metric and English rule.

Fits many Ford vechiles.